④ shows the module type of multiple function I/O (MIO). Selectable modules are I2, I4, K3 and V. N
means none, no module installed.
⑤ shows the module type of main output (OUTP). Selectable modules are L1, L4, W1, W2, G, K1, K3, K5,
X3, X5 etc.
⑥ shows the module type of alarm (ALM). Selectable modules are L1, L2, L4, L5, W1, W2, G, etc.
⑦ shows the module type of auxiliary output (AUX). Selectable modules are L1, L2, L4, L5, W1, W2, G, K1,
X3, X5, etc.
⑧ shows the module type of communication (COMM). Selectable modules are S, S4, V, etc.
⑨ shows the power supply of the instrument. If left blank, the power of the instrument is 100-240VAC.
"24VDC" means the power supply of 24V direct current.
Note 1: The instrument applies the technology of automatic zero and digital calibration, and is free of maintenance.
If the error exceeds certain range, generally, cleaning and drying the inside of the instrument can fix it. If not, send
the instrument back to the factory to examine and repair.
Note 2: Free repair and maintenance will be given in 3 years since the delivery. In order to get full and correct repa i r ,
write the phenomena and causes of the malfunction of the instrument.
To Next Page
Loading...
Need help?
General
