10
3. Preparation for Use
3-4. Charging
1) Initial Charging
ㆍ
Fully charge the product before the first usage.
1
2
3
1. Make sure that the switch on the side of the Main Unit is turned on.
> Refer to P8 <Initial Power Switch On/Off>
2. Start charging the battery by aligning the charging pins on the
bottom of the main unit with the terminal of the charging station.
3. Check the charging status. When charging, the lamp blinks in the
display window. When charging is completed, the battery status lights
up green.
Connect the adapter jack of the adapter directly to
the main unit.
2) Manual Charging
Charging Status Display Charging Charging Complete
Display Window
Red Light Yellow Light Green Light
Display Window Red Light Yellow Light Green Light
Battery Charging
Status
Below 20% Below 50% Above 51%
To Next Page
Loading...
Need help?
General
