16
4. Using Robot
4-7. Mop Cleaning
ㆍ
By attaching the mop pad, you can vacuum and mop at the same time.
ㆍ
If you install the mop plate, it cannot cross thresholds.
4-8. Boundary Strip Installation (Sold Separately)
ㆍ
When installing the boundary strip, attach the strip 15cm away from the area you want to block.
ㆍ
Boundary Strip can be ordered via our website (iclebous.com).
1
2
Mop Pad
Mop Plate
1 2
1. Attach the mop pad to the mop plate.
2. After turning the robot over, push the mop
plate in the direction of the arrow and attach it.
If the mop plate is not attached correctly, it may
detach.
floor Side
Please install the boundary strip around railings, toilets, and staircase entrances where there is a danger of
a fall. Install the strip so that the grooved side of the tape faces the floor.
Please use the enclosed double-sided tape to fix the boundary strip.
If the boundary strip is not fixed to the floor, the robot may not recognize it properly.
If dust accumulates on the fall prevention sensor of the product, the robot may
not recognize the prohibited area and may fall.
Fall prevention sensor
To Next Page
Loading...
Need help?
General
