17
5. Care and Maintenance
ㆍ
Placing a soft cloth on the floor while managing the robot reduces
scratches on the product.
ㆍ
Turn off the power switch on the side of the robot for safety while
managing the robot.
5-1. Empty Dust Bin and Change the Filter
1. Separate the dustbin from the
main unit of the robot.
2. Remove the filter as is shown in
the picture and clean the inside
properly.
However, if the filter is cleaned
with water, make sure it is
completely dry before assembly.
3. When replacing the filter, replace
only the EPA filter and reassemble
it.
The filter can be washed with
water. (1 time per month)
To maintain the filter
performance, it is recommended
to empty the bin every time
cleaning is completed.
EPA
Filter
EPA
Filter
Mesh
Filter
Mesh
Filter
Dust
Bin
Dust
Bin
1
2
3
To Next Page
Loading...
Need help?
General
