How to stop air leaking from my Yuwell Medical Equipment mask?
If you're experiencing air leakage around your Yuwell Medical Equipment mask, it might not be fitted correctly. Make sure to properly fit your mask, consulting your mask user guide for instructions on achieving a proper fit and seal.
Why does the air pressure in my Yuwell Medical Equipment mask seem too low?
If the air pressure in your Yuwell Medical Equipment mask feels too low, it might be because the ramp is in progress. You can either start your therapy after the set pressure is reached or turn off the ramp time.
Why does the air pressure in my Yuwell Medical Equipment mask seem too high?
If the air pressure in your Yuwell Medical Equipment mask feels too high, it could be that the ramp option is turned off. Enabling your ramp option might resolve this issue.
What to do if my mouth is very dry using Yuwell YH-350 Medical Equipment?
If your mouth feels very dry and uncomfortable while using Yuwell Medical Equipment, air might be escaping from your mouth. To address this, try increasing the humidity level. You might also consider using a chin strap to keep your mouth closed or switching to a full face mask.
Why am I getting water droplets with my Yuwell Medical Equipment?
If you find droplets of water on your nose, in the mask, or in the air tube when using your Yuwell Medical Equipment, the humidity level may be set too high. Try adjusting the humidity level to a lower setting.
How to fix a black screen on Yuwell YH-350 Medical Equipment?
If your Yuwell Medical Equipment screen is black, pressing the dial should turn on the screen light. Also, check the power connection to ensure it is firmly connected to the device.
Why am I getting a dry nose using Yuwell Medical Equipment?
A dry or blocked nose when using Yuwell Medical Equipment could be due to a humidity level that is set too low. Adjusting the humidity level may help alleviate this issue.
What to do if Yuwell YH-350 water tank is leaking?
If your Yuwell Medical Equipment water tank is leaking, check if the water tank is assembled correctly. If the tank is broken, contact your provider.
What does ERROR 5 mean on Yuwell YH-350 Medical Equipment?
If your Yuwell Medical Equipment displays 'ERROR 5', it indicates that a parameter exceeds its range. Please restart the device or contact your provider.
What does ERROR 6 mean on Yuwell YH-350 Medical Equipment?
If your Yuwell Medical Equipment displays 'ERROR 6', it means that the pressure exceeds its range. Please restart the device or contact your provider.
Specifies the intended use of the YH-550 and YH-350 devices for Obstructive Sleep Apnea.
Lists pre-existing medical conditions where positive airway pressure therapy may be contraindicated.
Provides critical warnings regarding device operation, modification, environment, and user safety.
Details important precautions for using the device and accessories to ensure safety and effectiveness.
Provides detailed instructions for setting up the device, including water tank and air tube connection.
Guides on how to initiate and cease therapy sessions using the device controls.
Details the various functions and settings available on the device.
Describes advanced functions and settings accessible via the clinical menu under medical guidance.
Details the recommended methods for cleaning the device, water tank, and air tube.
Provides solutions for common operational issues and potential problems with the device.
Lists specific error messages displayed on the LCD and their corresponding solutions or actions.
General| Model | YH-350 |
|---|---|
| Category | Medical Equipment |
| Type | Pulse Oximeter |
| Pulse Rate Measuring Range | 30 - 250 bpm |
| Power | 2 x AAA batteries |
| Pressure Range | Not applicable |
| Memory Capacity | Not applicable |
| Weight | Approximately 50g |
To Next Page
