How to fix air leaking from my Yuwell YH-830 Medical Equipment mask?
If air is leaking from around your mask, it might not be fitted correctly, or the size may be unsuitable. Ensure your mask is fitted correctly by checking your mask user guide for fit and seal instructions. Also, refer to the nose measurement card to choose the appropriate mask size.
What to do if my mouth is very dry using Yuwell YH-830 Medical Equipment?
If your mouth is very dry and uncomfortable while using the Yuwell Medical Equipment, it could be due to air escaping from your mouth, or the humidity level may be set too low. You might need a chin strap to keep your mouth closed or a full face mask. Alternatively, try increasing the humidity level on your device.
Why am I getting a dry or blocked nose using Yuwell YH-830?
A dry or blocked nose when using your Yuwell Medical Equipment can be due to several reasons. The humidity level may be set too low. For a blocked nose, it could be due to a history of nasal disease, so use after treatment by a doctor. Also, the pressure parameter may be set improperly. Adjust the humidity level and the pressure parameter accordingly.
What to do if air pressure in my Yuwell YH-830 Medical Equipment mask seems too high?
If the air pressure in your mask feels too high, the ramp option may be turned off, or the pressure parameter may be set too high. Enable your ramp option or decrease the pressure setting to resolve this.
How to stop water droplets in my Yuwell YH-830 mask and tube?
If you're experiencing water droplets on your nose, in the mask, and air tube, the humidity level may be set too high, or condensation may be forming due to cold weather. Adjust the humidity level. Consider buying a heated tube to solve condensation issues.
What to do if air pressure in my Yuwell YH-830 mask seems too low?
If the air pressure in your Yuwell Medical Equipment mask seems too low, it could be because the ramp is in progress, or the pressure parameter is set too low. You can start your therapy after the set pressure is reached, or turn the ramp time off. Alternatively, increase the pressure setting.
How to turn on the screen of my Yuwell YH-830?
If your screen is black, it could be that the screen backlight went off after therapy started, or the power is not connected firmly. Press the dial to turn on the screen light. Check the power connection to ensure it is firmly connected to the device.
What to do if my Yuwell YH-830 water tank is leaking?
If your water tank is leaking, it may be assembled incorrectly or it is broken. Check that the water tank is assembled correctly.
Critical safety instructions for operating the device to prevent harm or damage.
Step-by-step instructions for setting up the device for use.
Instructions for initiating a therapy session on the device.
Procedures for safely ending a therapy session.
Advanced settings for therapy adjustment, requiring physician input.
Solutions for common problems and error messages encountered with the device.
Common issues like mask leaks and their respective solutions.
General| Mode of Operation | Automatic |
|---|---|
| Display | LCD |
| Irregular Heartbeat Detection | Yes |
| WHO Hypertension Indicator | Yes |
| Product Name | YH-830 |
| Power Supply | 4 x batteries or AC adapter |
| Cuff Size | 22cm to 32cm |
| Automatic Shut-off | Yes |
To Next Page
