To Next PageTo Next PageWhy is my mouth so dry using Yuwell YH-580 Medical Equipment?
If you experience a dry and uncomfortable mouth while using Yuwell Medical Equipment, it could be due to air escaping from your mouth or the humidity level being too low. Consider using a chin strap to keep your mouth closed, switching to a full face mask, or increasing the humidity level on your device.
What to do if I get a dry or blocked nose using Yuwell YH-580?
If you're experiencing a dry or blocked nose while using Yuwell Medical Equipment, it could be due to a humidity level that is set too low, a history of nasal disease, or an improperly set pressure parameter. Try adjusting the humidity level. If you have a history of nasal disease, consult with your doctor. You may also need to adjust the pressure parameter.
How to stop air leaking from my Yuwell YH-580 Medical Equipment mask?
If air is leaking from around your mask when using Yuwell Medical Equipment, the mask size may not be suitable. Please refer to the nose measurement card to choose the appropriate mask size, consulting your mask user guide to check.
Why does the air pressure in my Yuwell YH-580 Medical Equipment mask feel too high?
If the air pressure in your Yuwell Medical Equipment mask feels too high, the pressure parameter may be set too high. You can enable your ramp option or decrease the pressure setting.
What to do if I get water droplets in my Yuwell YH-580 Medical Equipment mask?
If you're getting droplets of water on your nose, in the mask, or in the air tube while using Yuwell Medical Equipment, the humidity level may be set too high, or condensation may be forming due to cold weather. Try adjusting the humidity level. You can also buy a heated tube to solve condensation.
Why does the air pressure in my Yuwell YH-580 mask feel too low?
If the air pressure in your Yuwell Medical Equipment mask feels too low, the ramp may be in progress, or the pressure parameter may be set too low. You can start your therapy after the setting pressure has been reached, or turn off the ramp time. You can also increase the pressure.
What to do if my Yuwell Medical Equipment water tank is leaking?
If your Yuwell Medical Equipment water tank is leaking, it may be assembled incorrectly or it is broken. Check that the water tank is assembled correctly. Contact your provider or Yuwell if your water tank is broken.
General| Category | Medical Equipment |
|---|---|
| Operating Conditions (Temperature) | 5°C to 40°C |
| Storage Conditions (Temperature) | -20°C to 55°C |
| Product Name | YH-580 Nebulizer |
| Operating Conditions (Humidity) | 15% to 80% (non-condensing) |
Steps and details on how to begin a therapy session with the device.
Procedure for safely ending a therapy session and powering down the device.
Overview of device features and data parameters accessible to the patient.
Advanced functions requiring physician guidance, including mode and pressure setup.
Instructions for selecting between CPAP and APAP modes for therapy.
Procedure for setting the therapy pressure for CPAP and APAP modes.
Instructions for safely taking apart the device for cleaning.
Detailed instructions for cleaning the water tank to prevent mold and bacteria.
Common issues and their solutions related to mask fit, air pressure, and humidity.
Troubleshooting guide for specific LCD error messages and device malfunctions.
