To Next PageTo Next PageHow to fix air leaking from my Yuwell YH-825 mask?
If air is leaking from around your mask, it might not be fitted correctly, or the size may be unsuitable. Ensure your mask is fitted correctly by checking your mask user guide for fit and seal instructions. Also, refer to the nose measurement card to choose the appropriate mask size.
What to do if my mouth is very dry using Yuwell Medical Equipment?
If your mouth is very dry and uncomfortable while using the Yuwell Medical Equipment, it could be due to air escaping from your mouth, or the humidity level may be set too low. You might need a chin strap to keep your mouth closed or a full face mask. Alternatively, try increasing the humidity level on your device.
Why am I getting a dry or blocked nose using Yuwell YH-825?
A dry or blocked nose when using your Yuwell Medical Equipment can be due to several reasons. The humidity level may be set too low. For a blocked nose, it could be due to a history of nasal disease, so use after treatment by a doctor. Also, the pressure parameter may be set improperly. Adjust the humidity level and the pressure parameter accordingly.
What to do if air pressure in my Yuwell Medical Equipment mask seems too high?
If the air pressure in your mask feels too high, the ramp option may be turned off, or the pressure parameter may be set too high. Enable your ramp option or decrease the pressure setting to resolve this.
How to stop water droplets in my Yuwell Medical Equipment mask and tube?
If you're experiencing water droplets on your nose, in the mask, and air tube, the humidity level may be set too high, or condensation may be forming due to cold weather. Adjust the humidity level. Consider buying a heated tube to solve condensation issues.
What to do if air pressure in my Yuwell YH-825 mask seems too low?
If the air pressure in your Yuwell Medical Equipment mask seems too low, it could be because the ramp is in progress, or the pressure parameter is set too low. You can start your therapy after the set pressure is reached, or turn the ramp time off. Alternatively, increase the pressure setting.
How to turn on the screen of my Yuwell Medical Equipment?
If your screen is black, it could be that the screen backlight went off after therapy started, or the power is not connected firmly. Press the dial to turn on the screen light. Check the power connection to ensure it is firmly connected to the device.
What to do if my Yuwell Medical Equipment water tank is leaking?
If your water tank is leaking, it may be assembled incorrectly or it is broken. Check that the water tank is assembled correctly.
General| Brand | Yuwell |
|---|---|
| Model | YH-825 |
| Category | Medical Equipment |
| Language | English |
Safety guidelines and precautions for using the device.
Pre-existing medical conditions where therapy is not recommended.
Possible side effects experienced during therapy.
Guide to setting up the device for use.
Procedure for powering on and initiating a therapy session.
Steps to safely end therapy and turn off the device.
User-adjustable settings for comfort and effectiveness.
Method to access advanced clinical settings.
Options for choosing CPAP, S, ST, T, or VGPS modes.
Setting IPAP, EPAP, and other pressure values.
Instructions for taking the device apart for cleaning.
Important safety notices before cleaning the device.
Solutions for common operational problems.
Guidance for addressing specific error messages.
