Why does the air pressure in my Yuwell BreathCare PAP Medical Equipment mask feel too high?
If the air pressure in your Yuwell Medical Equipment mask feels too high, the pressure parameter may be set too high. You can enable your ramp option or decrease the pressure setting.
What to do if my mouth is very dry using Yuwell BreathCare PAP?
If your mouth is very dry and uncomfortable while using the Yuwell Medical Equipment, it could be due to air escaping from your mouth, or the humidity level may be set too low. You might need a chin strap to keep your mouth closed or a full face mask. Alternatively, try increasing the humidity level on your device.
Why am I getting a dry or blocked nose using Yuwell Medical Equipment?
A dry or blocked nose when using your Yuwell Medical Equipment can be due to several reasons. The humidity level may be set too low. For a blocked nose, it could be due to a history of nasal disease, so use after treatment by a doctor. Also, the pressure parameter may be set improperly. Adjust the humidity level and the pressure parameter accordingly.
What to do if air pressure in my Yuwell BreathCare PAP mask seems too high?
If the air pressure in your mask feels too high, the ramp option may be turned off, or the pressure parameter may be set too high. Enable your ramp option or decrease the pressure setting to resolve this.
What to do if I get water droplets in my Yuwell BreathCare PAP mask?
If you're getting droplets of water on your nose, in the mask, or in the air tube while using Yuwell Medical Equipment, the humidity level may be set too high, or condensation may be forming due to cold weather. Try adjusting the humidity level. You can also buy a heated tube to solve condensation.
Why does the air pressure in my Yuwell Medical Equipment mask feel too low?
If the air pressure in your Yuwell Medical Equipment mask feels too low, the ramp may be in progress, or the pressure parameter may be set too low. You can start your therapy after the setting pressure has been reached, or turn off the ramp time. You can also increase the pressure.
What does ERROR 2 mean on Yuwell BreathCare PAP?
ERROR 2 means there is a mistake of flow sensor. Please repower your device or contact your provider or Yuwell.
What does ERROR 8 mean on Yuwell BreathCare PAP Medical Equipment?
ERROR 8 indicates a mistake of blower. Please contact your provider or Yuwell.
Why air pressure in Yuwell BreathCare PAP Medical Equipment mask seems too low?
The air pressure may seem too low if the ramp is in progress or if the pressure parameter is set too low. Start your therapy after the set pressure is reached, or turn the ramp time off. You can also increase the pressure.
Why air pressure in Yuwell Medical Equipment mask seems too high?
The air pressure might seem too high if the ramp feature is turned off or if the pressure parameter is set too high. Enable your ramp option or decrease the pressure setting.
Crucial safety instructions for device operation, modification, environment, and handling.
Precautions regarding accessories, RF equipment, humidification, mask usage, and environment.
Conditions where positive airway pressure therapy is not recommended.
Potential side effects during therapy such as dry mouth, nosebleeds, or headaches.
Step-by-step guide for starting, stopping treatment, and powering off the device.
Procedures for taking apart and putting back together the device for cleaning.
Guidelines for cleaning the water tank, enclosure, and accessories.
Regular inspection of power adapter, cable, water tank, air tube, and air filter for damage.
Methods for transferring therapy data via SD card or wireless network.
Solutions for common issues, error codes, and device malfunctions.
Explanation of various symbols found on the device and its packaging.
General| Brand | Yuwell |
|---|---|
| Model | BreathCare PAP |
| Pressure Range | 4-20 cmH2O |
| Ramp Time | 0-45 minutes |
| Humidification | Integrated heated humidifier |
| Noise Level | <30 dB |
| Data Storage | SD Card |
| Operating Mode | CPAP, Auto CPAP |
| Display | LCD |
| Power Supply | 100-240V, 50/60Hz |
To Next Page
