To Next PageTo Next PageWhy am I getting a dry or blocked nose using Yuwell Medical Equipment?
A dry or blocked nose when using your Yuwell Medical Equipment can be due to several reasons. The humidity level may be set too low. For a blocked nose, it could be due to a history of nasal disease, so use after treatment by a doctor. Also, the pressure parameter may be set improperly. Adjust the humidity level and the pressure parameter accordingly.
What to do if my mouth is very dry using Yuwell BreathCare PAP?
If your mouth is very dry and uncomfortable while using the Yuwell Medical Equipment, it could be due to air escaping from your mouth, or the humidity level may be set too low. You might need a chin strap to keep your mouth closed or a full face mask. Alternatively, try increasing the humidity level on your device.
General| Brand | Yuwell |
|---|---|
| Model | BreathCare PAP |
| Pressure Range | 4-20 cmH2O |
| Ramp Time | 0-45 minutes |
| Humidification | Integrated heated humidifier |
| Noise Level | <30 dB |
| Data Storage | SD Card |
| Operating Mode | CPAP, Auto CPAP |
| Display | LCD |
| Power Supply | 100-240V, 50/60Hz |
Crucial safety instructions for device operation, modification, environment, and handling.
Precautions regarding accessories, RF equipment, humidification, mask usage, and environment.
Conditions where positive airway pressure therapy is not recommended.
Potential side effects during therapy such as dry mouth, nosebleeds, or headaches.
Step-by-step guide for starting, stopping treatment, and powering off the device.
Procedures for taking apart and putting back together the device for cleaning.
Guidelines for cleaning the water tank, enclosure, and accessories.
Regular inspection of power adapter, cable, water tank, air tube, and air filter for damage.
Methods for transferring therapy data via SD card or wireless network.
Solutions for common issues, error codes, and device malfunctions.
Explanation of various symbols found on the device and its packaging.
