Yuwell BreathCare PAP Wireless Connection Guide

1.Connectyourdevicetothenetwork
• Therearetwowaysforyoutoconnectyourdevicetothenetwork.
►
1.1 Method 1: Congure network via Bluetooth
(1) DownloadtheBreathcare+APP
• DownloadandinstallthelatestversionofBreathcare+toyourmobilephone.
• ForIOS:AppStore®
• ForAndroid:GooglePlay®
(2) Login
A. Createnewaccount:
• ClickCreate an accountontheloginpageoftheBreathcare+APP；
• Fillintherelevantinformationandsettheaccountpassword,thencheck
theboxtoagreetothetermsofuseandclickSend activation email；
• LoginyouremailaccountandchecktheemailsentbyYuwell.ClickActivate
your account now,thenclickApplication For Registration.Ifitshows
Register successfully,thentheactivationisdone；
• Aftersuccessfulactivation,clickSuretoreturntotheBreathcare+APPlogin
page.
B. Logintoanexistingaccount
• Enteryouraccountandpassword,clickLog intoentertheHomepage.
(3) Setyourdevice
• Poweronyourdevice,setUpload DataandBluetoothtoON.
Language
Upload Data
Bluetooth
Filter Reminder
Restore Defaults
English
ON
ON
4Week
>>Enter
(4) ConnectyourphoneanddeviceviaBluetooth
• TurnontheBluetoothonyourmobilephone,enterBreathcare+APP;
• Addyourdevice;
Add the 󽗉rst device：Click+Add deviceonthehomepagetoaddyourdevice；
Add more device：ClickMytab,thenclickMy device,and󽗉nallyclick+Addontheupperrightcornerto
addmoredevices.
BreathCarePAP
PositiveAirwayPressureUnits
Theguideisdesignedtoprovideguidanceonhowtoconnectthedevicetoawirelessnetworkandcheckthe
wirelessnetworksignalandthetherapydata.
Wireless Connection Operation Guide

Yuwell BreathCare PAP Specifications

General

Brand	Yuwell
Model	BreathCare PAP
Pressure Range	4-20 cmH2O
Ramp Time	0-45 minutes
Humidification	Integrated heated humidifier
Noise Level	<30 dB
Data Storage	SD Card
Operating Mode	CPAP, Auto CPAP
Display	LCD
Power Supply	100-240V, 50/60Hz