Need help?Do you have a question about the Z GRILLS Feed Life 7002B and is the answer not in the manual?
Critical safety warnings related to fire hazards, electrical shock, and poisonous gas.
Guidelines for safe assembly, operation distance, hot surfaces, and child supervision.
Advice on storing fuel safely and maintaining grill cleanliness to prevent fires.
Procedure for initial grill setup before first use or after running out of pellets.
Procedure to burn in a new grill at high temperature to remove manufacturing residues.
Steps to start the grill for normal operation, including setting the controller and waiting for temperature.
Steps to safely shut down the grill after cooking, including the shutdown cycle.
Actions to take in case of a grease fire, including turning off and closing the lid.
Guidance on handling error codes, including unplugging and troubleshooting.
Instructions for cleaning the grease tray, drain, and bucket.
Guidance on cleaning the grill racks, including specific materials to avoid.
Steps for cleaning the fire-pot and chimney, including vacuuming ash.
How to clean the interior and exterior surfaces of the grill.
Proper cleaning methods for food temperature probes to prevent contamination.
Advice on storing and managing wood pellets to prevent moisture issues.
Explanation of the different settings on the controller dial and their functions.
How to use the button to cycle through temperature readings from probes.
Troubleshooting steps for temperature sensor failures.
Procedure to reset the controller for system errors.
Reasons for low temperature errors and potential causes.
Steps to take when a high temperature error occurs.
Tips for safely unpacking the grill components.
General advice for the assembly steps that follow.
Information about the provided tools and fasteners for assembly.
Guidance on the quantity of pellets to add to the hopper for optimal performance.
Step-by-step guide for starting the grill for normal cooking.
Instructions for safely shutting down the grill after use.
Steps to resolve issues when the grill does not power on.
Troubleshooting steps for a blank controller display.
Solutions for when the fan or auger motor is not making noise.
Guidance for resolving Low Temperature Errors (LEr).
Steps to troubleshoot when the grill fails to produce smoke or fire.
How to handle issues caused by moist wood pellets.
Instructions for clearing excess ash from the fire-pot.
Steps to resolve High Temperature Errors (HEr) on the controller.
Solutions for inaccurate or fluctuating grill temperature readings.
Troubleshooting high temperatures occurring early in the cooking process.
Resolving issues with smoke quality or inability to reach target temperatures.
Addressing noise from the auger, possibly due to pellet size.
Warning against adding water to the pellet hopper.
Causes and solutions for smoke appearing in the pellet hopper.
Instructions for replacing the fuse, including time, difficulty, and tools.
Guide for replacing the temperature sensor.
Steps for replacing the controller board.
How to replace the fire-pot fan.
Procedure for replacing the ignition rod.
Guide for replacing the auger motor.
Steps for submitting a warranty claim, including required information.
Details of the 3-year warranty policy and coverage.
To Next Page
General