12
English
Find more information at www.zaco.eu
Product operation
Remote control operation
1
On / off
1. Press this button to switch from sleep mode to standby mode.
2. In standby mode, press this button to start cleaning.
3. During the cleaning process, press this button to stop cleaning.
2
Clock
Press this button to set the current time.
3
Spot mode
Press this button to start spott cleaning.
4
Return to charging station
Press this button to instruct the robot to return to the charging station.
5
Schedule
Press this button to set up a cleaning schedule. The robot will start cleaning according
to the scheduled time. To change the scheduled time, press the
button. If it
shows “00:00” on the remote control display, the scheduled time is canceled.
6
Edge mode
Press this button to start edge cleaning, where the robot cleans along the walls. After
cleaning, the robot will return to the charging station or the point where it started from.
7
MAX mode
Press this button to start MAX mode cleaning, where the robot cleans with maximum
power output.
Note: Please place two AAA/R03 batteries into the remote control before using it.
Please take out the batteries if the remote control is not used for a long time.
To Next Page
Loading...
Need help?
General
