How to fix ZACO A10 Pro Vacuum Cleaner when the main brush is stuck?
If your ZACO Vacuum Cleaner displays Error 8, it indicates that the main brush is stuck. Inspect the main brush and remove any foreign objects that may be causing the blockage.
Why are the side brushes on my ZACO A10 Pro stuck?
If your ZACO Vacuum Cleaner shows Error 9, the side brushes are likely stuck. This can happen when something becomes tangled in them. Check the side brushes and remove any foreign objects.
What to do if the nose wheel is jammed on my ZACO A10 Pro Vacuum Cleaner?
If your ZACO Vacuum Cleaner displays Error 7, it means the nose wheel is jammed. This can occur when something becomes tangled in it. Inspect the nose wheel and remove any foreign objects.
What to do if the front bumper of my ZACO A10 Pro Vacuum Cleaner is stuck?
If your ZACO Vacuum Cleaner shows Error 4, it indicates that the front bumper is stuck because the edge or collision sensor is jammed. Push the bumper on the left and right side to release possible jams.
What to do if my ZACO A10 Pro Vacuum Cleaner shows Error 5?
If your ZACO Vacuum Cleaner displays Error 5, it means the battery is low. To resolve this, place the robot vacuum cleaner on the charging station to recharge it.
What to do if my ZACO A10 Pro Vacuum Cleaner is trapped?
If your ZACO Vacuum Cleaner displays Error 6, it means the robot vacuum cleaner is trapped. Move the robot vacuum cleaner to an area with more open space and then start it.
General| Battery Capacity | 5200 mAh |
|---|---|
| Water Tank Capacity | 300 ml |
| Power | 50 W |
| Cord Length | Cordless |
| Navigation Type | Laser (LiDAR) |
| Features | App Control, Voice Control, Multi-Floor Mapping |
| Filter Type | HEPA |
To Next Page
