33
Find more information at www.zaco.eu
EN English
Routine maintenance
Wash the dustbin
1. Remove the sponge filter and the high-performance filter after prolonged use.
2. Clean the primary filter, dustbin and sponge filter under running water.
CAUTION: The high-efficiency filter cannot be cleaned and must not come into
contact with water.
3. After washing, shake off the remaining water, let the filter and dustbin air dry, and
do not use them again until they are completely dry.
Note
• Wash the primary filter and the sponge filter with clean water and do not
add any detergent.
• Do not use a brush to clean the filter. Only use your fingers to avoid any
damage.
• The filter shall be dried in the air for at least 24 hours. This ensures that it is
dried thoroughly.
High-performance filter cover
High-performance filter
Sponge filter
Primary filter
To Next Page
Loading...
