EasyManua.ls Logo

ZACO A10 Pro - Clean the Signal Output Range the Self-Emptying Charging Station; Battery; Firmware Update

ZACO A10 Pro
45 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
Find more information at www.zaco.eu
EN English
Routine maintenance
Battery
Firmware update
Clean the signal output range on the
self-emptying charging station
Note
Recommended cleaning frequency:
once a month.
A rechargeable high-performance lithium-ion battery is installed in the robot vacuum
cleaner. To maintain battery performance, keep the robot charged during daily use.
If you do not use the robot for a long time, charge it fully and store the product in a dry
and shady place. It is recommended to charge the robot at least once every three
months to avoid battery damage due to overcharging or discharging.
Open the tab "update firmware" in the mobile app. If an outstanding firmware update is
detected, perform the update according to the instructions. The battery capacity
should not be less than 50% during the firmware update. It is recommended to place the
robot on the charging station during the update.

Related product manuals