24
Find more information at www.zaco.eu
EN English
Product operation
Intelligent cleaning (default mode)
The robot vacuum cleaner scans the environment, creates a map and intelligently divides
the areas into different rooms. When cleaning is complete, the robot returns to the char-
ging station to recharge. (To better create the map, the robot must start from the
charging station during the first cleaning).
Note
Do not move the robot vacuum cleaner indiscriminately during operation. After
moving the robot, place it back near the original location. When the robot is
restarted, it attempts to recalculate its position in the room. After successful
positioning, the robot continues cleaning where it left off. If the robot is unable to
determine its exact position, it will cancel the cleaning process it has started and
begin a new map. This may result in the robot skipping the automatic return to
the charging station.
Cleaned area Cleaned area
Area to be cleaned
Area being cleaned
To Next Page
Loading...
