38
Find more information at www.zaco.eu
EN English
Routine maintenance
Clean suction shaft of the self-emptying charging station
If the indicator light of the station flashes red after replacing the dust bag, please
disconnect the power plug. Then turn the station upside down (the bottom side is now
on top) and check the viewing window of the suction shaft for blockages.
If the suction shaft is blocked, remove the cover with a screwdriver (as shown in the
figure below) and clean the suction shaft.
Caution
Violent disassembly is strictly prohibited. Please reinstall it after cleaning.
Suction shaft cover
Suction shaft
To Next Page
Loading...
