22
Find more information at www.zaco.eu
EN English
Product operation
Operating instructions
1. Power On / Power Off
Press and hold the Power button for 3 seconds. When the indicator light is on, the
robot has booted up successfully. If the robot vacuum cleaner is in standby mode,
press and hold the Power [Image] button for 3 seconds. When the indicator light
turns off, the device has successfully powered off.
Note
• The robot vacuum cleaner should not be used for cleaning liquids.
• When the battery charge is less than 15%, the robot will stop cleaning and
return to the charging station to recharge the battery.
• Make sure that there are no cables in the way. The robot can get tangled in
loose cables and can also pull a cable out of the socket. Under certain
circumstances, this can lead to damage to electrical equipment.
Note
The robot vacuum cleaner cannot be switched
off during the charging process.
2. Cleaning / Pause
After the device is turned on, you have 2 options to start the cleaning process:
1. Press the Home button on the robot
2. Use the mobile app.
To Next Page
Loading...
