ZALMAN Z3 User Manual

6
HDD Guide
6) Cable Connection / 케이블 연결
7) 2.5" HDD and SSD Optional / 2.5" HDD/SSD 추가 장착
Mother Board I/OMother Board
I/O Port
- 2.5" HDD and SSDs can be installed on the right side of
case as shown in the diagram below.
- 다음 그림과 같이 케이스 오른쪽 측면에 SSD를 장착하여
사용할 수 있습니다.
B Bolt
- Use the HDD Guide to install 3.5" HDD.
- HDD GUIDE를 이용하여 3.5" HDD를 장착합니다.
5) 3.5" HDD Installation / 3.5” HDD 장착
Power LED
Power
Motherboard / 마더보드
Power Button / 전원 버튼
or
Fan Controller Connection / Fan Controller 연결
PSU Power / PSU 전원 Fan Power / Fan 전원

ZALMAN Z3 Specifications

General

Type	Mid Tower
Motherboard Support	ATX, Micro-ATX, Mini-ITX
Material	Steel, Plastic
Expansion Slots	7
Maximum CPU Cooler Height	160 mm
Maximum GPU Length	360 mm
Maximum PSU Length	180 mm
Fan Support Front	120mm x 2
Fan Support Top	120mm x 2
Fan Support Rear	120mm x 1
Color	Black
Power Supply	Not Included
Drive Bays	4 x 3.5", 3 x 5.25"
Cooling System	Rear: 120mm fan x 1 (1 included)
Front I/O Ports	USB 3.0 x 1, USB 2.0 x 1, Audio In/Out
Fan Support Bottom	1 x 120 mm
Included Fans	1 x 120 mm rear