Why Zanussi ZCG63260XE Cookers oven does not heat up?
Your Zanussi Cookers oven may not be heating up because it is deactivated, so you should activate it. Another reason could be that the clock is not set, so set the clock. Also, make sure that the necessary settings are correct.
What to do if the display shows "12.00" on Zanussi ZCG63260XE?
If the display on your Zanussi Cookers shows "12.00", it means there was a power cut. Reset the clock.
What to do if I cannot activate Zanussi ZCG63260XE Cookers appliance?
If you cannot activate your Zanussi Cookers appliance, check if it is correctly connected to the electrical supply. Also, if the fuse is blown, make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician.
Why does the flame extinguish immediately after ignition on Zanussi Cookers?
If the flame extinguishes immediately after ignition on your Zanussi Cookers, it could be because the thermocouple is not heated up sufficiently. After lightning the flame, keep the knob pushed for equal or less than 10 seconds.
How to fix an uneven flame ring on Zanussi ZCG63260XE Cookers?
To fix an uneven flame ring on your Zanussi Cookers, make sure that the injector is not blocked and the burner crown is clean, as the burner crown may be blocked with food residues.
What to do if there is no spark when trying to activate the spark generator on Zanussi Cookers?
If there is no spark when you try to activate the spark generator on your Zanussi Cookers, place the burner cap and crown correctly, as they may be placed incorrectly.
General| Type | Freestanding Cooker |
|---|---|
| Number of Burners | 4 |
| Energy Efficiency Class | A |
| Width | 60 cm |
| Color | Stainless Steel |
| Fuel Type | Gas |
| Hob Type | Gas |
| Ignition Type | Automatic |
| Dimensions (H x W x D) | 90 x 60 x 60 cm |
| Freestanding cooker | Yes |
| Oven Capacity | 65 L |
To Next Page