What to do if my Zanussi ZDF26004XA Dishwasher program does not start?
If your Zanussi Dishwasher won't start, ensure that the appliance door is fully closed. Also, if the delay start function is activated, either cancel the setting or wait until the countdown is complete. Additionally, the dishwasher may be undergoing a resin recharge, which typically lasts about 5 minutes.
How to improve drying results in Zanussi ZDF26004XA Dishwasher?
To address poor drying results with your Zanussi Dishwasher: * Avoid leaving tableware inside a closed appliance for too long. * Ensure there is rinse aid, and if not enough, set the rinse aid dispenser to a higher level. * Towel dry plastic items if needed. * Activate the XtraDry option and set AirDry for the best drying performance. * Always use rinse aid, even with multi-tablets.
What to do if the anti-flood device is on in my Zanussi Dishwasher?
If the anti-flood device on your Zanussi Dishwasher is activated and the display shows an error, close the water tap and contact an Authorised Service Centre.
What to do if Zanussi Dishwasher programme does not start?
If your Zanussi Dishwasher programme does not start, ensure that the appliance door is closed properly. If the delay start function is active, either cancel the setting or wait for the countdown to finish. Note that the appliance may be recharging the resin inside the water softener, which takes approximately 5 minutes.
How to activate Zanussi Dishwasher?
If you cannot activate your Zanussi Dishwasher, ensure that the mains plug is correctly connected to the mains socket and check the fuse box for any damaged fuses.
Why Zanussi Dishwasher is not filling with water and shows i10 or i11?
If your Zanussi Dishwasher is not filling with water and the display shows i10 or i11, make sure the water tap is open and that the water supply pressure is adequate. Check that the water tap and the filter in the inlet hose are not clogged. Also, ensure the inlet hose has no kinks or bends. If the water pressure is too low, contact your local water authority.
What to do if my Zanussi ZDF26004XA doesn't drain and shows i20?
To address the issue of the Zanussi Dishwasher not draining water and displaying the i20 error, ensure that the sink spigot is not clogged. Also, check that the interior filter system is not clogged and that the drain hose has no kinks or bends.
What to do if my Zanussi ZDF26004XA Dishwasher does not drain the water?
If your Zanussi Dishwasher won't drain water and the display shows an error, check to make sure the sink spigot is not clogged. Also, ensure that the filters in the outlet hose and the interior filter system are clear of any blockages. Finally, verify that the drain hose is free from any kinks or bends.
Why is my Zanussi Dishwasher not filling with water?
If your Zanussi Dishwasher is not filling with water and the display shows an error, make sure the water tap is fully open. Check that the water supply pressure is adequate by contacting your local water authority. Also, inspect the water tap, the filter in the inlet hose, and the inlet hose itself to ensure they are free from clogs, kinks, or bends.
General| Door color | Stainless steel |
|---|---|
| Water fill | Cold, Hot |
| Cord length | 1.5 m |
| Control type | Buttons, Rotary |
| Product size | Full size (60 cm) |
| Built-in display | Yes |
| Appliance placement | Freestanding |
| Cycle time | 227 min |
| Noise level | 49 dB |
| Delay start (max) | 24 h |
| Dishwashing programs | Auto 45-70°C, Eco, Intensive, Pre-rinse, Quick |
| Number of place settings | 13 place settings |
| Number of washing programs | 5 |
| Number of temperature settings | 4 |
| Feet adjustment | 10 mm |
| Current | 10 A |
| Connected load | 1950 W |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Energy efficiency scale | A to G |
| Power consumption (off) | 0.5 W |
| Water consumption per cycle | 11 L |
| Energy consumption per cycle | 1.039 kWh |
Weight and Dimensions| Depth | 625 mm |
|---|---|
| Width | 600 mm |
| Height | 850 mm |
Safety guidelines for children and vulnerable individuals using the appliance.
General safety precautions and intended use of the appliance.
Instructions and warnings for the correct installation of the appliance.
Guidelines for safe electrical connection, including earthing and plug usage.
Explanation of the meaning and function of various indicator lights.
Details on the available washing programmes and their characteristics.
How to enter and use the programme selection mode.
Procedure to cancel a running programme or delay.
How to access and modify user-specific appliance settings.
Guide to setting the water softener level based on water hardness.
Table correlating water hardness levels with water softener settings.
Instructions for filling the salt container before initial use.
Instructions for filling the rinse aid dispenser before initial use.
How to add detergent for daily washing cycles.
Tips for efficient use, loading, pre-rinsing, and energy saving.
Detailed explanation of the water softener's function and adjustment.
Recommendations on using specific cleaning agents for optimal results.
To Next Page
