What to do if the anti-flood device is on in my Zanussi ZDF26011XA?
If the anti-flood device is activated on your Zanussi Dishwasher, close the water tap and contact an Authorised Service Centre.
Why does my Zanussi ZDF26011XA trip the circuit breaker?
Your Zanussi Dishwasher might trip the circuit breaker if the amperage is insufficient to power all appliances in use simultaneously. Check the socket amperage and meter capacity, or turn off another appliance. If this doesn't resolve the issue, there may be an internal electrical fault, and you should contact an Authorised Service Centre.
What to do if my Zanussi Dishwasher door is hard to close?
If your Zanussi Dishwasher door is difficult to close, ensure the appliance is level by adjusting the feet. Also, check that no tableware parts are protruding from the baskets.
General| Type | Freestanding |
|---|---|
| Appliance placement | Freestanding |
| Control type | Buttons |
| Energy Efficiency Class | A+ |
| Number of Place Settings | 13 |
| Number of washing programs | 5 |
| Drying system | Residual heat |
| Maximum delay start | 24 hours |
| Energy consumption per cycle | 1.039 kWh |
| Annual energy consumption | 295 kWh |
| Width | 600 mm |
| Height | 850 mm |
| Inlet hose length | 1.5 m |
| Outlet hose length | 1.5 m |
| Delay Start | Yes |
| Half Load Option | No |
| Drying Class | A |
| Product size | Standard |
| Wash Programs | Eco, Intensive, Quick |
| Water consumption per cycle | 11 liters |
| Annual water consumption | 3080 liters |
| Programs | Intensive, Eco, Quick, Rinse |
Safety instructions for children and vulnerable users.
Instructions for installing the appliance.
Instructions and warnings for electrical hookup.
Guidelines for connecting the appliance to the water supply.
How to select a wash programme on the appliance.
How to access and change user-specific settings.
Steps to clean the appliance's filters.
Causes and solutions for inadequate washing performance.
Reasons and fixes for dishes not drying properly.
To Next Page