Why is my Zanussi ZDT25001FA not filling with water?
If your Zanussi Dishwasher isn't filling with water, ensure the water tap is fully open and that the water supply pressure is adequate. Contact your local water authority for information on water pressure. Also, check that the water tap and the filter in the inlet hose are not clogged, and make sure the inlet hose has no kinks or bends.
What to do if my Zanussi Dishwasher does not drain water?
If your Zanussi Dishwasher isn't draining water, check that the sink spigot isn't clogged and ensure the drain hose has no kinks or bends.
How to fix a leaking Zanussi ZDT25001FA Dishwasher door?
If there's a small leak from the door of your Zanussi Dishwasher, the appliance may not be level. Loosen or tighten the adjustable feet if applicable. Also, the appliance door may not be centered on the tub; adjust the rear foot if applicable.
Why does the Zanussi Dishwasher program last too long?
If a Zanussi Dishwasher program lasts too long, check if the delayed start option is activated. If it is, cancel the delay setting or wait for the countdown to finish.
Why Zanussi ZDT25001FA Dishwasher programme does not start?
If the program on your Zanussi Dishwasher doesn't start, make sure the appliance door is closed properly. If the delay start is set, either cancel the setting or wait for the countdown to finish. The appliance may also be in the process of recharging the resin inside the water softener, which takes approximately 5 minutes.
What to do if Zanussi ZDT25001FA trips the circuit-breaker?
If your Zanussi Dishwasher trips the circuit-breaker, the amperage might be insufficient to supply all appliances in use simultaneously. Check the socket amperage and the capacity of the meter, or turn off one of the appliances in use. If this doesn't solve the issue, there may be an internal electrical fault, and you should contact an Authorised Service Centre.
Why is my Zanussi ZDT25001FA making rattling sounds?
If you hear rattling or knocking sounds from inside your Zanussi Dishwasher, it could be due to the tableware not being properly arranged in the baskets. Refer to the basket loading leaflet for guidance. Also, ensure that the spray arms can rotate freely.
Why is the Zanussi ZDT25001FA Dishwasher door difficult to close?
If the door of your Zanussi Dishwasher is difficult to close, the appliance may not be level. Try loosening or tightening the adjustable feet. Also, check if any parts of the tableware are protruding from the baskets.
Why does my Zanussi ZDT25001FA Dishwasher keep stopping and starting?
It is normal for the Zanussi Dishwasher to stop and start multiple times during operation. This process helps to achieve optimal cleaning results and save energy.
What to do if the anti-flood device is on in my Zanussi ZDT25001FA Dishwasher?
If the anti-flood device on your Zanussi Dishwasher is activated, close the water tap and contact an Authorised Service Centre.
This document is a user manual for a Zanussi dishwasher, model ZDT25001FA, providing instructions for installation, daily use, settings, and troubleshooting.
The Zanussi ZDT25001FA is a dishwasher designed for household and similar applications, including farmhouses, staff kitchen areas, hotels, motels, and bed & breakfast environments. Its primary function is to clean and dry crockery, cutlery, pots, and pans efficiently. The appliance features a water softener system to remove minerals from the water supply, which is crucial for optimal washing results and appliance longevity. It also includes a rinse aid dispenser to ensure dishes dry without streaks or stains. The dishwasher offers various programs tailored to different degrees of soil and types of load, aiming for efficient water and energy consumption.
The dishwasher is activated by an on/off button and offers several program options, including:
The dishwasher also includes a Delay Start function, allowing users to postpone the program start by 3, 6, or 9 hours. An AUTO OFF function automatically deactivates the appliance after 5 minutes of inactivity (either after a program completes or if a program has not started), contributing to energy saving.
For detergent, users can choose between separate detergent, salt, and rinse aid, or multi-tablets. When using multi-tablets that integrate salt, rinse aid, and detergent functions, the Multitab option can be activated. This option deactivates the release of salt and prolongs the program duration to enhance cleaning and drying results. However, for hard and very hard water, using solo-detergent, rinse aid, and salt separately is recommended for optimal results.
The appliance provides indicators for program end, multitab activation, and salt levels. The salt indicator is always off when the program is operating.
Regular maintenance is essential for the dishwasher's performance and longevity. Key maintenance aspects include:
The manual also provides troubleshooting information for common issues, such as the appliance not starting, not filling or draining water, leaks, or unsatisfactory washing/drying results, guiding users to potential causes and solutions before contacting an Authorized Service Centre. For safety, it is emphasized that repairs must be performed by qualified personnel.
General| Type | Freestanding |
|---|---|
| Number of Place Settings | 13 |
| Energy Efficiency Class | A+ |
| Height | 85 cm |
| Width | 60 cm |
| Drying Class | A |
| Delay Start | Yes |
| Half Load Option | Yes |
To Next Page