What to do if my Zanussi ZDT26010FA Dishwasher program does not start?
If your Zanussi Dishwasher won't start, verify that the appliance door is fully closed. Also, if the delay start function is activated, either cancel the setting or wait for the countdown to complete. In some cases, the dishwasher may be undergoing a resin recharge, which takes about 5 minutes.
Why is my Zanussi Dishwasher not filling with water?
If your Zanussi Dishwasher isn't filling with water, first ensure the water tap is completely open. Check that the water supply pressure is adequate by contacting your local water authority if needed. Also, make sure the water tap, the filter in the inlet hose, and the inlet hose itself are free from clogs, kinks, or bends.
What to do if my Zanussi Dishwasher does not drain the water?
If your Zanussi Dishwasher is not draining water, check the following: 1. Ensure the sink spigot is not clogged. 2. Verify that the filters in the outlet hose and the interior filter system are clear. 3. Confirm that the drain hose is free from kinks or bends.
Why is there a small leak from the Zanussi Dishwasher door?
If you notice a small leak from the door of your Zanussi Dishwasher, it might not be leveled correctly. Try loosening or tightening the adjustable feet. If that doesn't solve it, adjust the rear foot to ensure the door is centered on the tub.
Why does the Zanussi ZDT26010FA program last too long?
If your Zanussi Dishwasher program is running longer than expected, check if the delayed start option is enabled. If it is, you can either cancel the delay or wait for the countdown to finish.
Why does my Zanussi ZDT26010FA Dishwasher trip the circuit-breaker?
If your Zanussi Dishwasher trips the circuit-breaker, it could be due to insufficient amperage to supply all appliances in use simultaneously. Check the socket amperage and the capacity of the meter, or turn off one of the appliances in use. If the problem persists, it could indicate an internal electrical fault.
Why is the Zanussi ZDT26010FA Dishwasher door difficult to close?
If the door of your Zanussi Dishwasher is hard to close, make sure the appliance is leveled by adjusting the feet. Also, check if any tableware is sticking out from the baskets, preventing the door from closing properly.
Why is my Zanussi ZDT26010FA making rattling or knocking sounds?
If you hear rattling or knocking sounds inside your Zanussi Dishwasher, it could be due to improperly arranged tableware in the baskets. Make sure to arrange the tableware correctly. Also, confirm that the spray arms can rotate without any obstruction.
What to do if the anti-flood device is on in my Zanussi ZDT26010FA?
If the anti-flood device on your Zanussi Dishwasher is activated, immediately close the water tap.
Safety precautions for children and individuals with reduced capabilities using the appliance.
General safety rules for using the dishwasher in household and similar applications.
Instructions and warnings related to the proper installation of the appliance.
Guidelines and warnings for safe electrical connections and earthing.
Instructions for connecting the appliance to the water supply and ensuring no leaks.
Details on available wash programmes, their phases, and consumption values.
Detailed steps for adjusting the water softener setting based on water hardness.
Instructions for filling the salt container with dishwasher salt.
Instructions for filling the rinse aid dispenser.
Instructions on how to add detergent to the dispenser, including prewash.
Guidance on using multi-tablets and adjusting water softener.
Step-by-step guide on how to select and start a wash programme.
Detailed explanation of the water softener's role and adjustment.
General| Door color | Not applicable |
|---|---|
| Control type | Touch |
| Built-in display | Yes |
| Appliance placement | Fully built-in |
| Control panel color | Black |
| Cycle time | 195 min |
| Noise level | 47 dB |
| Dishwashing programs | Auto 45-70°C, Eco, Glass/delicate, Intensive, Quick |
| Number of place settings | 13 place settings |
| Number of washing programs | 7 |
| Number of temperature settings | 4 |
| Drying class | A |
| Annual water consumption | 2775 L |
| Annual energy consumption | 262 kWh |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Power consumption (off) | 0.1 W |
| Water consumption per cycle | 9.9 L |
| Energy consumption per cycle | 0.932 kWh |
Weight and Dimensions| Depth | 555 mm |
|---|---|
| Width | 596 mm |
| Height | 818 mm |
To Next Page