What to do if Zanussi ZDT26022FA does not drain water?
If your Zanussi Dishwasher isn't draining and the display shows a symbol, check that the sink spigot, the filter in the outlet hose, and the interior filter system are not clogged. Also, ensure the drain hose has no kinks or bends.
What to do if Zanussi Dishwasher does not fill with water?
If your Zanussi Dishwasher isn't filling with water and the display shows a symbol, make sure the water tap is open, the water supply pressure isn't too low, and the water tap and the filter in the inlet hose aren't clogged. Also, check the inlet hose for kinks or bends.
Why Zanussi Dishwasher program does not start?
If the Zanussi Dishwasher program isn't starting, ensure the appliance door is fully closed. If the delay start is set, either cancel it or wait for the countdown to finish. Also, the appliance may be undergoing a resin recharge, which takes about 5 minutes.
How to fix a leak from Zanussi ZDT26022FA door?
If there's a small leak from the door of your Zanussi Dishwasher, make sure the appliance is level by adjusting the adjustable feet. If the door isn't centered, adjust the rear foot.
Why Zanussi ZDT26022FA Dishwasher program lasts too long?
If a Zanussi Dishwasher program is running longer than expected, select the TimeManager option to shorten the program time. Also, check if the delayed start option is enabled; cancel it or wait for the countdown.
Why does my Zanussi ZDT26022FA trip the circuit-breaker?
If your Zanussi Dishwasher is tripping the circuit-breaker, it could be due to insufficient amperage to supply all appliances in use simultaneously. Check the socket amperage and meter capacity, or turn off another appliance. Alternatively, there may be an internal electrical fault.
How to stop rattling sounds in Zanussi Dishwasher?
If you hear rattling or knocking sounds from inside your Zanussi Dishwasher, ensure the tableware is properly arranged in the baskets and that the spray arms can rotate freely.
Why is Zanussi ZDT26022FA Dishwasher door difficult to close?
If the Zanussi Dishwasher door is hard to close, ensure the appliance is level by adjusting the feet. Also, check if any tableware is protruding from the baskets.
Why does Zanussi ZDT26022FA Dishwasher stop and start during operation?
It is normal for the Zanussi Dishwasher to stop and start multiple times during operation. This ensures optimal cleaning and energy savings.
What to do if Zanussi ZDT26022FA anti-flood device is on?
If the anti-flood device on your Zanussi Dishwasher is activated and the display shows a symbol, close the water tap.
General| Type | Freestanding |
|---|---|
| Product type | Dishwasher |
| Size | Full-size |
| Energy Efficiency Class | F |
| Number of Place Settings | 13 |
| Wash Programs | 6 |
| Annual Water Consumption | 2800 L |
| Delay Start | Yes |
| Half Load Option | Yes |
| Number of programs | 6 |
| Noise Level | 49 dB(A) |
| Dimensions (H x W x D) | 850 x 600 x 625 mm |
To Next Page