Page 40
Flow chart showing how to use the SET BATTERY TYPE adjustment
1) Opening Zapi Menu
2) Press Top Left & Right Buttons to enter
CONFIG Menu.
3) The Display will show: SET MODEL
4) Press ROLL UP button until
ADJUSTMENTS. menu appears.
5) ADJUSTMENTS appears on the display.
6) Press ENTER to go into the ADJUSTMENTS
Menu.
7) The display will show: SET BATTERY TYPE.
8) Press SET UP to choose nominal value of
the battery.
9) New battery value appears.
10) Press OUT.
11) Confirmation request appears.
12) Press ENTER to accept the changes, or press
OUT if you do not accept the changes.
13) Press OUT. Display now shows the Opening
Zapi Menu.
To Next Page
Loading...
Need help?
General
