Page 18/60 H2B USER'S MANUAL - 550145G
- ADJUSTMENTS:
SET BATTERY TYPE 12V, 24V, 36V, 40V, 48V, 60V, 72V, 80V, 96V, 120V
ADJUST BATTERY ....V
traction pump
- PARAMETER CHANGE:
ACCELERATION DELAY ACCELERATION DELAY
INVERS. BRAKING EV. ACCELER DELAY
BRAKING (*) DECELER. DELAY
RELEASE BRAKING EV. DECELER DELAY
PEDAL BRAKING MAXIMUM CURRENT
CUTBACK SPEED 1 HYD SPEED COARSE
CUTBACK SPEED 2 HYD SPEED FINE
CUTBACK SPEED 3 HYDRO COMPENS.
AUXILIARY TIME CREEP SPEED
COMPENSATION WEAK DROPOUT
BRAKING MODUL HYDRO TIME
MAXIMUM CURRENT 1ST SPEED COARSE
MAX SPEED FORW 1ST SPEED FINE
MAX SPEED BACK 1ST SPEED COMP.
CREEP SPEED 2ND SPEED COARSE
WEAK DROPOUT 2ND SPEED FINE
CURVE BRAKING 2ND SPEED COMP
CURVE TIME 3RD SPEED COARSE
BACKING TIME 3RD SPEED FINE
3RD SPEED COMP
4TH SPEED COARSE
4TH SPEED FINE
4TH SPEED COMP
MAX SPEED LIFT (*)
MIN VALVE VOLT
MAX VALVE VOLT
AUXILIARY TIME
traction pump
- TESTER: VMN VMN
MOTOR VOLTAGE MOTOR VOLTAGE
ACCELERATOR LIFTING CONTROL
MOTOR CURRENT MOTOR CURRENT
TEMPERATURE TEMPERATURE
CUTBACK SWITCH1 BATTERY VOLTAGE
CUTBACK SWITCH2 LIFTING SWITCH
CUTBACK SWITCH3 DESCENT SWITCH
BRAKE SWITCH 1ST SPEED SWITCH
To Next Page
Loading...