Page 13
PIN REFERENCE DESCRIPTION
E1 CMM Positive Common Feed to Rev, Fwd, SR1, PB, and Seat
Microswitches.
E2 REV Input from Reverse Direction Microswitch. Active High.
E3 FW Input from Forward Direction Microswitch. Active High.
E4 SR1 Input from First Speed Reduction Switch. Active Low.
E5 PB Input from Pedal Brake Switch. Active High.
E6 SEAT Input from Seat Switch. Active High with delay.
E7 MOT. THERM Input from Motor Thermal Switch.
E8 FREE1 Input from any Active High Switch.
E9 - BATT Battery Negative.
F1 - BATT Battery Negative.
F2 - BATT Battery Negative..
G1 PCLRXD Positive Serial Reception.
G2 NCLRXD Negative Serial Reception.
G3 PCLTXD Positive Serial Transmission.
G4 NCLTXD Negative Serial Transmission.
G5 - Batt Negative supply to Digital Console.
G6 + VL Positive supply to Digital Console.
G7 // Free.
G8 // Free.
L1 CMM Common Supply to Fwd & Rev Backing Switches, Motor thermal
switch, Speed Reduction 3 Switch, and 2 spare switches.
L2 BACK FW Input from Forward Backing Switch. Active High.
L3 BACK REV Input from Reverse Backing Switch. Active High.
L4 ENABLE/ SR3 Input from pedal accelerator (Enable) Active High.or Speed Re-
duction 3 Switch Active Low.
L5 FREE Input from Free Microswitch 1. Active High.
L6 FREE2 Input from Free Microswitch 2. Active High.
L7 NAUX Negative Output to Auxilliary.
L8 PAUX Positive Output to Auxiliary.
L9 FREE3 Free Entry 3. Connected to CMM (if J1= 2-3) or to- Batt
(if J1= 1-2) through microswitch.
To Next Page
Loading...
Need help?
General
