Page 19
5.1 DESCRIPTION OF PROGRAMMABLE FUNCTIONS (OPTIONS).
Using the CONFIG MENU of the console, it is possible to select from the following
options:
SUBMENU “SET OPTIONS”:
1 HOUR COUNTER:
- RUNNING: The counter registers travel time only.
- KEY ON: The counter registers when the key switch is Closed.
2 BRUSH SWITCH:
- PRESENT: The Brush Switch provides an input signal from the
motor brushes.
- OPTION #2: The Brush Switch Input may be used as a Second Speed
Reduction.
3 ENABLE SWITCH:
- PRESENT: The Enable Switch provides an input from the pedal
accelerator.
- OPTION #3: The Enable Switch input may be used as a Third Speed
Reduction.
4 AUX FUNCTION:
- OPTION #1: The output on Pin B6 provides a Negative supply to a
fan.
- HYDRO CONT.: The output on Pin B6 provides a Negative supply to the
coil of a steering Contactor.
5 SET BATTERY TYPE: This option allows selection of the Nominal Battery Volt-
age.
To Next Page
Loading...
