Zebra 2824 - Internal ZebraNet PrintServer II Pinout

Internal ZebraNet
PrintServer II
(optional)
This interface uses an RJ-45 straight-through
cable type. The table below provides the pinout
assignments.
Signal Pin Pin Signal
Tx+ 1 1 Tx+
Tx- 2 2 Tx-
Rx+ 3 3 Rx+
--- 4 4 ---
--- 5 5 ---
Rx- 6 6 Rx-
--- 7 7 ---
--- 8 8 ---
For details regarding this interface and its oper-
ation, refer to the user guide supplied with your
ethernet print server.
980381-001 Rev. B 29
Appendix