Cleaning the
Platen
The platen, over time, picks up adhesive and
dust which requires occasional cleaning.
To follow these steps, you require a clean,
lint-free cloth lightly moistened with isopropyl
alcohol.
Turn OFF (O) the printer before performing this
procedure.
Let the platen dry for at least one minute before
loading media.
32 980381-001 Rev. B
Gently Wipe
Top of Platen
Advance Platen
One-Sixth (1/6) Turn
(about 60°)
Repeat Steps Until
Platen is Clean
To Next Page
Loading...