Need help?Do you have a question about the Zebra 2844-Z and is the answer not in the manual?
General| Resolution | 203 dpi (8 dots/mm) |
|---|---|
| Print Method | Direct Thermal |
| Print Width | 4.09 inches (104 mm) |
| Maximum Print Length | 39 inches (991 mm) |
| Print Speed | 4 inches per second (102 mm/s) |
| Memory | 8 MB SDRAM |
| Connectivity | Serial, Parallel, USB |
| Media Sensors | Reflective and Transmissive |
| Interface | RS-232, Parallel, USB, Ethernet (optional) |
| Power Requirements | 100-240 VAC, 50/60 Hz |
To Next Page
