15
Printer Setup and Operation
Determine the Label Collection Method
5/9/19 ZT411/ZT421 Color Touch User Guide P1106464-001
Delayed Cut Cutter option The printer waits for a delayed cut ZPL
command (
~JK) before it cuts the last printed
label.
Applicator This mode is for use with a
machine that applies labels.
The printer prints when it receives a signal from
the applicator. Refer to the Advanced User
Information section of the Maintenance Manual
for additional information about the applicator
interface.
Linerless Peel* * Reserved for future use.
Linerless Rewind*
Linerless Tear*
Linerless Cut*
Linerless Delayed
Cut*
Table 2 • Collection Methods and Printer Options (Continued)
Collection Method Required Printer Option Description
To Next Page
Loading...