Zebra Color Touch ZT411 - Page 24

Printer Setup and Operation
Load the Media—Tear-Off Mode
24
P1106464-001 ZT411/ZT421 Color Touch User Guide 5/9/19
4. Close the media door.
5. Set the printer to Tear-Off mode (for more information, see Print > Label Position >
Collection Method on page 78).
6. Press PAUSE to exit pause mode and enable printing.
The printer may perform a label calibration or feed a label, depending on your settings.
7. For best results, calibrate the printer. See Print > Sensors > Manual Calibration
on page 81.
Media loading in Tear-Off mode is complete.
DRAFT