Mobile Printer CPCLProgramming Manual P8-11
REWIND Command
This command is used to turn the rewind (or take-up)
motor on or off. The printer defaults to REWIND-ON on
power up. The REWIND command is ignored by printers
that are not equipped with a motorized rewind.
format: {command}
where: {command}: Choose one of the following:
REWIND-OFF
REWIND-ON
REWIND Command Example
INPUT (REWIND.LBL):
! 0 200 200 150 1
REWIND-OFF
TEXT 5 0 0 20 TURNS REWIND OFF
PRINT
To Next Page
Loading...