Zebra CPCL - POSTFEED Command

Mobile Printer CPCLProgramming Manual P8-19
POSTFEED Command
The POSTFEED command instructs the printer to ad-
vance the media a specified amount after printing.
Format:
{command} {length}
where:
{command}: POSTFEED
{length}: Unit length the printer advances media
after printing.
POSTFEED Command Example
The following example sets up the printer for post-feeding
40 dot-lines after printing.
Input (POSTFEED.LBL):
! 0 200 200 210 1
TEXT 7 0 0 20 POSTFEED EXAMPLE
FORM
POSTFEED 40
PRINT