Zebra CPCL - ADVANCED UTILITIES

To Next Page

To Previous Page

Mobile Printer CPCLProgramming Manual P10-1

ADVANCED UTILITIES

The Advanced Utilities are used to manage the flash file

system, obtain information about firmware and printer

applications, configure the printer for use in other coun-

tries, and to set several operating parameters.

The following example illustrates the use of some of the

commands you will find in this section. The example

assumes that the printer is connected to a host computer

capable of full duplex serial communication. Comments

to the right are not part of the session. Comments in

UPPERCASE are commands sent from the host to the

printer. Comments in lower case are printer responses to

the host. These commands are further explained as you

read through this section.

! UTILITIES

START A UTILITIES SESSION

VERSION

GET THE FIRMWARE VERSION

60016001

6001 firmware version is 60.01

CHECKSUM

GET APPLICATION CHECKSUM

F723F723

F723 checksum is F723

DIR

GET DIRECTORY OF THE

FLASH FILE SYSTEM

DirectoryDirectory

Directory directory has the following 3 files

PLL_LAT.CSF 17306PLL_LAT.CSF 17306

PLL_LAT.CSF 17306 17306 byte file

PLL_LAT.CSF 18423PLL_LAT.CSF 18423

PLL_LAT.CSF 18423 18423 byte file

AUTOEXEC.BAT 96AUTOEXEC.BAT 96

AUTOEXEC.BAT 96 96 byte file

TYPE AUTOEXEC.BAT

WHAT'S IN AUTOEXEC.BAT?

! UTILITIES! UTILITIES

! UTILITIES autoexec.bat line 1

SETLP 5 1 40SETLP 5 1 40

SETLP 5 1 40 autoexec.bat line 2

PRINTPRINT

PRINT autoexec.bat line 3

DEL AUTOEXEC.BAT

DELETE THE AUTOEXEC.BAT FILE

DIR

GET A DIRECTORY OF THE FLASH

FILE SYSTEM

DirectoryDirectory

Directory directory has the following 2 files

PLL_LAT.CSF 17306PLL_LAT.CSF 17306

PLL_LAT.CSF 17306

PLB_LAT.CSF 18423PLB_LAT.CSF 18423

PLB_LAT.CSF 18423

CLOSE THE UTILITIES SESSION

Note:

Text printed in italic type refers to data sent to the printer.

Text printed in bold type refers to data sent from the printer.

Zebra CPCL - ADVANCED UTILITIES

Related product manuals