Zebra CPCL - LABEL COORDINATE SYSTEM

P1-8 Mobile Printer CPCLProgramming Manual
LABEL COORDINATE SYSTEM
The x and y coordinates are expressed here in terms of
dots. Coordinates in ( ) are for 200 dot per inch printers.
On 200 d.p.i. printers, 8 dots (either horizontally or verti-
cally) equal 1 millimeter and 203 dots equate approxi-
mately to 1 inch.
Coordinates in [ ] are for 300 dot per inch printers. On
300 d.p.i. printers 12 dots equal 1 millimeter, and 305
dots equate approximately to 1 inch.
Notes:
1. Coordinates refer to the actual printing area of the printers.
2. ”y” =the available label height which can vary with the resident
application. (See Getting Printer Information, Page P1-3.)
4" Printer
2" Printer
3" Printer
(0,0)
Label Width
Label Height
2.25" Printer
(447, 0)
[670,0]
(383, 0)
[574,0]
(575, 0)
[862,0]
(831, 0)
[1246,0]
Print Direction
(383, y)
[574,y]
(447, y)
[670,y]
(575, y)
[862,y]
(831,y)
[1246,y]