Zebra CPCL - SET-TIME Utility

P10-18 Mobile Printer CPCLProgramming Manual
SET-TIME Utility
This command sets the time in the real time clock mod-
ule. Time should be a valid time and be given in the
specified format. This command will be ignored by print-
ers that are not equipped with a real time clock module.
Format:
<!> <UTILITIES>
{command} {time-stamp}
<PRINT>
where:
{command}: SET-TIME
time-stamp}: hh:mm:ss
hh = hours (00 – 23)
mm = minutes (00 – 59)
ss = seconds (00 – 59)