Mobile Printer CPCLProgramming Manual P14-5
Bluetooth
®
Parameters
The following parameter names are only available with
Bluetooth enabled applications. Changes made using the
setvar command with Bluetooth parameters will be set in
the printer, but will not take effect until a new link is estab-
lished, power is cycled or the device.reset command is
issued. If a link already exists the change will not effect
the current connection and will not cause a disconnect.
bluetooth.address
type: getvar
This parameter is the Bluetooth device address - pro-
grammed into each radio.
getvar result Returns the printer’s Bluetooth address.
Example Description Get printers Bluetooth address.
Syntax ! U1 getvar “bluetooth.address”
Result “00:80:37:16:87:71”
continued on next page
To Next Page
Loading...