Mobile Printer CPCLProgramming Manual P14-7
bluetooth.bluetooth_pin
type: getvar, setvar
This parameter is used to connect to the printer only
when the “bluetooth.authentication” parameter is set to
“setpin”.
This parameter is
not
used when the
“bluetooth.authentication” parameter is set to “default” or
“off”. See “bluetooth.authentication”.
getvar result returns the printer’s bluetooth PIN value
Example Description Instructs the printer to respond with
the Bluetooth PIN value
Syntax !U1 getvar
“bluetooth.bluetooth_pin”
Result “MyPin”
setvar choices text string up to 10 characters
Default “ “
Example Description Instructs the printer to change the
Bluetooth PIN value
Syntax !U1 setvar
“bluetooth.bluetooth_pin” “MyPin”
Result Changes password to “MyPin”
continued on next page
To Next Page
Loading...