Zebra CPCL - File Parameters

P14-18 Mobile Printer CPCLProgramming Manual
File Parameters
file.delete
type: do
This command can be used to delete printer files.
Please exercise caution when deleting files and insure factory installed files
are not deleted.
do parameters Name of file to be deleted.
Example Description This command instructs the printer
to delete a specified file.
Syntax ! U1 do “file.delete” “abcd.cpf”
Result Deletes abcd.cpf from the printer.
file.dir
type: getvar
This parameter refers to the printer file directory.
getvar result Printer directory.
Example Description Get printer file directory.
Syntax ! U1 getvar “file.dir”
Result Directory
INDEX .WML 631
CONFIG .SYS 19
1793000 Bytes Free
“ok”
file.print
type: do
This command can be used to print the contents of
printer files.
do parameters File name.
Example Description This command instructs the printer
to print the contents of the file
called config.sys.
Syntax ! U1 do “file.print” “config.sys”
Result Contents of the config.sys file will
be printed.
continued on next page