Mobile Printer CPCLProgramming Manual P14-57
ip.snmp.set_community_name
type: getvar; setvar
This parameter is used when changing SNMP data re-
motely. The SNMP client must supply the set community
name that matches the printer’s set community name in
order to alter any SNMP data.
getvar result This will return the SNMP set community name
value.
Example Description This command instructs the printer
to return the printer’s SNMP “set”
community string.
Syntax ! U1 getvar
“ip.snmp.set_community_name”
Result “private”
setvar choices Valid values : Any string up to 20 characters
long
Default “private”
Example Description This command instructs the printer
to set the SNMP set community
string.
Syntax ! U1 setvar
“ip.snmp_set_community_name”
“private1”
Result “private1”
continued on next page
To Next Page
Loading...