Mobile Printer CPCLProgramming Manual P14-91
ip.mirror.auto
type: getvar, setvar
This parameter is used to enable or disable the file mir-
roring process on the printer for the initial power-up se-
quence and at repeating intervals defined by
“ip.mirror.freq”.
getvar result The current mirror setting.
Example Description Instructs the printer to respond with
the value of the FTP mirror mode
Syntax !U1 getvar “ip.mirror.auto”
Result “off”
setvar choices “off”: mirror will not be performed automatically
“on”: mirror will be performed automatically when
the printer is first powered-on and at the interval
defined by “ip.mirror.freq”
Default “off”
Example Description Enable the mirror process
Syntax ! U1 setvar “ip.mirror.auto” “on”
Result The printer will perform the mirror
process on initial power-up and at
the repeated interval defined by
“ip.mirror.freq”
ip.mirror.fetch
type: do
This command will force the mirror process to be per-
formed immediately.
do choices Any text string.
Example Description Perform the mirror process
Syntax ! U1 do “ip.mirror.fetch” “yes”
Result The printer will immediately contact
the FTP server defined by
“ip.mirror.server”, log on
with the defined username and
password and look for mirror
file updates.
To Next Page
Loading...