Mobile Printer CPCLProgramming Manual P14-93
ip.mirror.password
type: getvar; setvar
This parameter defines FTP password that will be used
for the mirror process.
getvar result The current mirror password – masked with aster-
isks.
Example Description Instructs the printer to respond with
the value of the FTP password
Syntax !U1 getvar “ip.mirror.password”
Result “********”
setvar choices Any text string up to 20 characters in length
Default “password”
Example Description Change mirror password to “secret”
Syntax ! U1 setvar “ip.mirror.password”
“secret”
Result The next time the mirror process is
performed, the printer will use the
FTP password “secret”.
ip.mirror.path
type:getvar; setvar
This parameter defines the path on the FTP where the
mirror directories are located. This can be a relative path
based on the FTP username or an absolute path based
on the FTP root directory.
getvar result The current mirror path.
Example Description Instructs the printer to respond with
the FTP path to the mirror directo-
ries.
Syntax !U1 getvar “ip.mirror.path”
Result “Zebra/QL 320”
setvar choices Any text string up to 50 characters in length.
Default “Zebra/QL 320”
Example Description Change mirror path to “zebra/ql”
Syntax ! U1 setvar “ip.mirror.path” “zebra/
ql”
Result The next time the mirror process is
performed, the printer will look for
the updates in the “zebra/ql” rela-
tive directory.
To Next Page
Loading...