Mobile Printer CPCLProgramming Manual P15-1
PRINTER CONFIGURATION AND SETUP
Using Label Vista for Printer
Configuration
The Label Vista label creation
application can also be used to re-
configure the printer by sending new
application, font or .bat files to the
printer. The Label Vista utilities are
located under the Printer Menu.
You should first establish communi-
cations between your printer and a
PC running label vista by using the
Com Port Setup menu detailed
below:
Port Sets up the communications
port via the ComPort dialog box. The
user may select from several different
methods of communicating with the
printer and select the rate at which
data is transferred.. The Com1 or
Com2 selections allow bi-directional
serial communications with the
printer.
Note: The LPT1 write/
COM1 read or LPT1
write/COM2 read
options are only used
with the Bravo series
of desk top printers.
Two network
protocols are
available to talk to
Zebra printers
equipped with
wireless network
capabilities: NET-
WORK TCPIP and
To Next Page
Loading...