Zebra CPCL User Manual

vi Mobile Printer CPCLProgramming Manual
TABLE OF CONTENTS (continued)
IR OR CABLE INTERFACE SELECTION .............................. P10-40
BHT-BAUD COMMAND ..........................................................P10-40
SETTING THE MODE FOR IR DATA TRANSMISSION ........P10-40
CONFIGURING THE BHT FOR IR TRANSMISSION ............ P10-41
BHT-IR FILE TRANSMISSION ...............................................P10-42
CONFIGURING THE BHT FOR CABLE TRANSMISSION.... P10-43
LOADING A .DAT FILE INTO THE BHT ................................. P10-44
INTERRUPTED TRANSMISSIONS .......................................P10-45
EXAMPLE .DAT FILE.............................................................. P10-46
SRF-ACCESS AND END-SRF-ACCESS COMMANDS ........ P10-47
BHT-BAUD COMMAND ..........................................................P10-48
BHT MODE COMMANDS.......................................................P10-49
BHT PROTOCOL COMMAND ................................................P10-53
PRINTER ESCAPE COMMANDS ...........................P11-1
SET AND READ CODE COMMAND ........................................ P11-1
PRINTER ESCAPE COMMANDS FORMAT ............................ P11-2
STATUS/INFORMATION .......................................................... P11-3
USER LABEL COUNT .............................................................. P11-5
POWER OFF COMMAND ........................................................ P11-5
WIRELESS NETWORK PRINTERS....................... P12-1
INTRODUCTION....................................................................... P12-1
NETWORK PRINTER SAFETY CONSIDERATIONS .............. P12-1
LAN COMMAND ....................................................................... P12-1
SETTING THE IP ADDRESS FOR NETWORK PRINTERS .... P12-7
LAN COMMAND RESPONSE .................................................. P12-8
NETWORK PRINTER TROUBLESHOOTING ......................... P12-9
WIRELESS LAN REPORT EXAMPLE ................................... P12-10
PROGRAMMING FOR THE DISPLAY OPTION .... P13-1
INTRODUCTION:......................................................................P13-1
EXAMPLE 1: ............................................................................. P13-1
EXAMPLE 2: ............................................................................. P13-5
CONFIGURATION/CONTROL COMMANDS......... P14-1
INTRODUCTION....................................................................... P14-1
COMMAND FORMAT ............................................................... P14-1
COMMANDS / PARAMETERS................................................. P14-3
BLUETOOTH® PARAMETERS................................................ P14-5
COMM PORT PARAMETERS ................................................ P14-11
DEVICE PARAMETERS .........................................................P14-13
DISPLAY PARAMETERS ....................................................... P14-15
FILE PARAMETERS...............................................................P14-17
PRINTER MECHANISM PARAMETERS ...............................P14-19
INPUT PARAMETER .............................................................. P14-22

Zebra CPCL Specifications

General

Programming Language	CPCL
Print Method	Direct Thermal
Resolution	203 dpi
Print Speed	Up to 4 ips
Media Handling	Roll-fed
Connectivity	USB
Memory	8 MB
Dimensions	Varies by model
Weight	Varies by model
Storage Temperature	-40°F to 140°F (-40°C to 60°C)