Zebra CPCL - BARCODE-TEXT Command

P5-18 Mobile Printer CPCLProgramming Manual
BARCODE-TEXT Command
The BARCODE-TEXT command is used to label bar
codes with the same data used to create the bar code.
The command eliminates the need to annotate the bar
code using separate text commands. The text will be
centered below the bar code.
Use BARCODE-TEXT OFF (or BT OFF) to disable.
Format:
{command} {font number} {font size} {offset}
where:
{command}: BARCODE-TEXT
(or BT)
{font number}: The font number to use when
annotating the bar code.
{font size}: The font size to use when annotat-
ing the bar code.
{offset}: Unit distance to offset text away
from the bar code.