Zebra CPCL - PATTERN Command

P7-6 Mobile Printer CPCLProgramming Manual
PATTERN Command
The PATTERN command is used with the LINE and
SCALE-TEXT commands to change the patterns used to
fill these shapes. Valid pattern values are listed below.
Format:
{command} {pattern number}
where:
{command}: PATTERN
{pattern number}: Choose from the following:
100 Filled (solid black/default pattern).
101 Horizontal lines.
102 Vertical lines.
103 Right rising diagonal lines.
104 Left rising diagonal lines.
105 Square pattern.
106 Cross hatch pattern.